| At JetSet Plumbing if we get a job to do and it’s a leaking tap, we will always change both hot and cold jumper valves (washers). Even if only the one washer has perished, the reason we do this is through experience in plumbing maintenance we have found once one washer has gone it won’t be long until the other is gone as well.
Whilst a plumber is at your house it is better to do both and saves the inconvenience of putting another day aside to allow a plumber access. What also sets JetSet Plumbing apart on leaking taps, as well as changing both washers we also grease spindles to make it much easier to turn on and off. Also we re-seat bodies which are where the hot and cold washers sit on the seal.
By smoothing the seat (re-seating) we improve the life of the washers for there is no rough edges. Too many times we have been called out to jobs sometimes after hours to hear the customer say “we had a plumber fix that tap only last month”. With changing both, this never happens and you have peace of mind that it is done properly.
Here at JetSet Plumbing we have the customer’s best interests in mind and are always looking for opportunities to show you. We are mobile all over the Gold Coast and Brisbane 24 hours a day 7 days a week. Our office is located at 107/137 Laver Drive, Robina 4226, in Queensland. Specialized but certainly not limited to blocked drains, water leaks and hot water systems. When you need a fully licensed plumber brisbane or plumber gold coast that will be on time the same day, give us a call. |
Article Details